Xhorse XSBTK0EN Bluetooth Smart Key - FAQs & Troubleshooting

Get the most out of your XHORSE XSBTK0EN Bluetooth Smart Key. Fix unresponsive auto-lock, set custom commands, bind multiple phones, and more. Dive into our FAQs to master your smart key's full potential!

Q: Are the Auto Lock/Unlock Features Not Responsive?

A: As shown in the picture, if the auto lock/unlock feature is not responsive, you can enable the [Auto Lock/Unlock] feature to calibrate the sensing position.

The APP provides two methods for calibrating the sensing position:

1. Manual adjustment: As shown in the picture, manually drag the lock and unlock points to set the desired positions.

2. Intelligent sensing: as shown in the picture, calibrate the parameters based on the actual device-vehicle distance.

Q: How to Set Custom Key Combinations?

If the vehicle has special functions(e.g., hold lock to raise windows, double-click trunk to open, press and hold lock to remote start), you can set custom key combinations through [Advanced Settings - Custom buttons]. This allows the app to perform these special functions. Refer to the on-screen instructions for specific adjustment methods, as shown in the picture.

Q: How to Bind Multiple Phones?

Xhorse Bluetooth Digital Smart Key supports binding up to 12 phones. Click [Advanced Setting - Learning Mode - Enter Learning Mode] to add a new phone.

Additionally, you can reset the Bluetooth connection password via [Change Password] as shown in the picture.

Q: Is There a Maintenance Mode?

Bluetooth digital smart key supports setting a maintenance mode, which temporarily disables phone detection. Click [Advanced Setting - Switching Mode - Maintenance Mode]. In this mode, the vehicle can unlock/lock doors and start without detecting the phone. This is typically used for scenarios such as car washing. As shown in the picture.

Q: Can the Smart Key Part Inside the Device Be Used for Emergency Starting?

The device includes a physical emergency key. Under normal circumstances, the functionality of this emergency key is restricted and remains in a protected state for security purposes. Even if removed, if cannot be used directly.

www.xhorse.co.uk

Xhorse XSBTK0EN Smart Key: Step-by-Step Setup & Programming Guide

Upgrade your car with the Xhorse Bluetooth Digital Smart Key XSBTK0EN - a cutting-edge device that turns your smartphone into a digital car key. Enjoy keyless entry, remote start, and vehicle diagnostics, all without needing a network connection. Installation is simple via the OBD port, and control is seamless through the Smart Key Box app (iOS & Android).

Step 1: Key Programming

Note: For security, the initial setup requires Xhorse professional equipment.

For Automotive Locksmiths:

- Disassemble the device carefully (tweezers recommended).

- Install the battery, ensuring correct polarity.

- Program the key using an Xhorse generation matching device (e.g., VVDI Key Tool Plus).

For Car Owners:

- Visit a professional locksmith or repair shop for first-time installation.

Programming Steps (BYD Example):

1. Remote Program

- Insert the Bluetooth Digital Smart Key.

- Select: Remote Program > BYD > Han ID46/4A 433.92 > Generate.

- Confirm "Burn Success."

2. Detect Chip & Frequency

- If unrecognized, reconnect via OBD and pair with Bluetooth to activate.

3. Immo Programming

- Select:Immo Programming > BYD > 2021-(new) > Smart Key Programming.

- Hold the key near the induction coil.

- Confirm "Programmed Successfully."

4. Test Functionality

- Ensure the battery is installed and test the remote.

Step 2: Bind the Device

1. Download the Smart Key Box app.

2. Insert the device into the OBD port.

3. Open the app, connect, and pair via Bluetooth.

Step 3: OBD Diagnostic Program (Optional)

- Enter OBD Diagnosis and select your vehicle model.

- Note: Unsupported models still work as digital keys but lack real-time diagnostics.

Final Steps

Once complete, your Xhorse Digital Smart Key is ready for use!

For more details, visit www.xhorse.co.uk