Wireless Remote vs. Super Remote: A Comparative Overview

This guide outlines the key differences between the Wireless Remote and Super Remote, including their hardware, supported types, and usage notes.

1. Core Identification & Hardware

Wireless Remote: Corresponds to the XN series. It has an inductor on the back but does not contain triodes (transistors).

Super Remote: Corresponds to the XE series. It features two triodes (transistors) and also has an inductor on the back.

Common Requirement: For both remotes, the battery must be installed during the key generation process.

2. Supported Types & Applications

Wireless Remote

Supports:

Electric models: 46, 47, and others.

Some 13 transponder models.

Important Note: Honda models 46 and 47 specifically require generation with a Wireless Remote.

Super Remote

Supports a wide range of types, including:

8A (Toyota H / Hyundai 8A, cloneable)

8C (Haima)

8E (Honda)

4C (Corolla)

4D (60, 63, 70, 80, 83, 72G, 67, 69)

4E (64)

48 (VW, Honda, etc.)

7935 (33, 40, 41, 42, 43, 44)

7936 (46)

11, 12, 13

Important Note: It does not support ID47 and ID49.

Summary of Key Differences:

For more information, visit: www.xhorsetool.co.uk

How to Fix Xhorse VVDI MB FBS3 KeylessGo Key Battery Drain?

Problem: Users of the Xhorse VVDI MB FBS3 Smart Key have reported issues with excessive battery drain, leading to frequent battery replacements. This problem often stems from a design flaw in the key fob, where improper handling can cause a short circuit, resulting in rapid battery depletion.

Solution (3 Steps)

1. Open the Key - Carefully pry apart the key fob.

2. Insulate the Contact - Cover the exposed metal battery contacts with insulating tape (Kapton tape works best).

3. Reassemble & Test - Close the key and check if all buttons work.

Prevention Tips

1. Avoid pressing buttons too hard.

2. Use quality batteries.

3. Buy the improved version like VVDI BE Key Pro.

For further assistance, visit www.xhorse.co.uk.

Solved: Xhorse Digital Key "Not Allowed Used In Current Region (1_IE)

If you've encountered the frustrating "This device is not allowed to be used in the current region! (1_IE)" error message with your Xhorse XSBTK0EN Bluetooth Digital Smart Key, that's because you're using the device outside its intended region.

Why Does This Error Occur?

Xhorse manufactures two distinct versions of its Digital Smart Key:

1. Global Version: Works worldwide without regional restrictions

2. Chinese Version (CN): Designed exclusively for use within China

The "1_IE" error specifically indicates you've purchased the China-only version of the device, which is geographically locked from functioning outside Chinese borders.

Simple Solution to Fix the Regional Restriction

The good news? This problem has an easy solution:

1. Contact your seller immediately - Explain that you received the Chinese version by mistake.

2. Request a version exchange - Ask for the global version of the XSBTK0EN Smart Key.

3. Verify compatibility before purchase - Always confirm you're getting the global version if you need international functionality.

Key Differences Between CN vs Global Versions

Where to Buy the Correct Version?

For guaranteed global compatibility, purchase directly from authorized international distributors like www.xhorse.co.uk or other region-specific official sellers.

Pro Tip: Always confirm with the seller before purchase that you're getting the global version if you plan to use the device outside China.

Final Thoughts

While the regional lock can be frustrating, the solution is straightforward. By exchanging your Chinese version for the global variant, you'll enjoy full functionality of your Xhorse Digital Smart Key without geographical limitations. Remember to always verify version compatibility with sellers to avoid similar issues in the future.

www.xhorse.co.uk

Xhorse XSBTK0EN Bluetooth Smart Key - FAQs & Troubleshooting

Get the most out of your XHORSE XSBTK0EN Bluetooth Smart Key. Fix unresponsive auto-lock, set custom commands, bind multiple phones, and more. Dive into our FAQs to master your smart key's full potential!

Q: Are the Auto Lock/Unlock Features Not Responsive?

A: As shown in the picture, if the auto lock/unlock feature is not responsive, you can enable the [Auto Lock/Unlock] feature to calibrate the sensing position.

The APP provides two methods for calibrating the sensing position:

1. Manual adjustment: As shown in the picture, manually drag the lock and unlock points to set the desired positions.

2. Intelligent sensing: as shown in the picture, calibrate the parameters based on the actual device-vehicle distance.

Q: How to Set Custom Key Combinations?

If the vehicle has special functions(e.g., hold lock to raise windows, double-click trunk to open, press and hold lock to remote start), you can set custom key combinations through [Advanced Settings - Custom buttons]. This allows the app to perform these special functions. Refer to the on-screen instructions for specific adjustment methods, as shown in the picture.

Q: How to Bind Multiple Phones?

Xhorse Bluetooth Digital Smart Key supports binding up to 12 phones. Click [Advanced Setting - Learning Mode - Enter Learning Mode] to add a new phone.

Additionally, you can reset the Bluetooth connection password via [Change Password] as shown in the picture.

Q: Is There a Maintenance Mode?

Bluetooth digital smart key supports setting a maintenance mode, which temporarily disables phone detection. Click [Advanced Setting - Switching Mode - Maintenance Mode]. In this mode, the vehicle can unlock/lock doors and start without detecting the phone. This is typically used for scenarios such as car washing. As shown in the picture.

Q: Can the Smart Key Part Inside the Device Be Used for Emergency Starting?

The device includes a physical emergency key. Under normal circumstances, the functionality of this emergency key is restricted and remains in a protected state for security purposes. Even if removed, if cannot be used directly.

www.xhorse.co.uk

Xhorse XSBTK0EN Smart Key: Step-by-Step Setup & Programming Guide

Upgrade your car with the Xhorse Bluetooth Digital Smart Key XSBTK0EN - a cutting-edge device that turns your smartphone into a digital car key. Enjoy keyless entry, remote start, and vehicle diagnostics, all without needing a network connection. Installation is simple via the OBD port, and control is seamless through the Smart Key Box app (iOS & Android).

Step 1: Key Programming

Note: For security, the initial setup requires Xhorse professional equipment.

For Automotive Locksmiths:

- Disassemble the device carefully (tweezers recommended).

- Install the battery, ensuring correct polarity.

- Program the key using an Xhorse generation matching device (e.g., VVDI Key Tool Plus).

For Car Owners:

- Visit a professional locksmith or repair shop for first-time installation.

Programming Steps (BYD Example):

1. Remote Program

- Insert the Bluetooth Digital Smart Key.

- Select: Remote Program > BYD > Han ID46/4A 433.92 > Generate.

- Confirm "Burn Success."

2. Detect Chip & Frequency

- If unrecognized, reconnect via OBD and pair with Bluetooth to activate.

3. Immo Programming

- Select:Immo Programming > BYD > 2021-(new) > Smart Key Programming.

- Hold the key near the induction coil.

- Confirm "Programmed Successfully."

4. Test Functionality

- Ensure the battery is installed and test the remote.

Step 2: Bind the Device

1. Download the Smart Key Box app.

2. Insert the device into the OBD port.

3. Open the app, connect, and pair via Bluetooth.

Step 3: OBD Diagnostic Program (Optional)

- Enter OBD Diagnosis and select your vehicle model.

- Note: Unsupported models still work as digital keys but lack real-time diagnostics.

Final Steps

Once complete, your Xhorse Digital Smart Key is ready for use!

For more details, visit www.xhorse.co.uk

3 Methods to Disassemble Xhorse VVDI Remote Keys

This is a tutorial on how to disassemble Xhorse VVDI Remote Keys. They are divided into 5 types: Super Remote XE Series, Smart Remote XS Series, Wired Remote XK Series, Wireless Remote XN Series, and Special Remote PCB Exclusivly XZ Series.

The removal of VVDI remote keys is easy. There are 3 methods:

1) The matching tool is on the right side of the key. Stuff the tool and push up until the back of the key pops out.

2) There is a small gap on the back of the remote key. Use a tool to pry up the back shell in the gap.

3) Pull both sides of the remote key apart firmly with your hands. Take out the shell of the other half of the remote key. Continue to disassemble the shell of the remote key with the chip.

We can see from the image that the front and back of the internal chip for the 5 types are different.

Of course, they have different connection methods with other Xhorse devices: wireless and wired.

www.xhorse.co.uk

Discover New Xhorse XK Wired Remote V2: Available in 2 Styles

The second-generation Xhorse VVDI Wired Remote is here, offering impressive upgrades that boost performance and improve the user experience. We're thrilled to unveil 2 new versions - let's explore their features and discover how they can elevate your work!

 DS Style Universal Remote

 MQB Style Wired Remote

1. Powered by the latest XM5118 Transceiver

The second-generation VVDI Wired Remote features the advanced XM5118 transceiver, improving efficiency, durability, and top-tier performance.

2. Supports Wireless Programming

Wired Remote, Wireless Programming. Skip the programming cable - insert the battery and begin wireless programming, free from connection issues.

3. Lower Power Consumption

Experience reduced power consumption with a 75% drop in static current and a 30% decrease in operating current, providing longer battery life and enhanced performance.

4. Enhanced Anti-static Protection

Say goodbye to concerns about static electricity during dry winter seasons. This upgrade reduces the need for customer support and guarantees reliable performance across various working conditions.

With these cutting-edge features, the second-generation VVDI Wired Remote is designed to enhance your workflow, delivering unmatched convenience, and durability efficiency.

www.xhorse.co.uk